Skip to content
1m LOVE Letters
Home / Hire Items / 1m LOVE Letters

Hire Items

1m LOVE Letters

Large 1m LOVE letters bring a clear photo focal point to receptions, engagement parties and launch nights. They are hired as a full illuminated set, with delivery, venue set-up and collection handled across Gauteng and further afield.

A bright LOVE feature that reads well in photos

The 1m LOVE set is built for events that need a clean statement piece near the dance floor, the entrance, or beside the cake table. Each letter stands at roughly 1 metre high, with internal lighting that gives a bright white glow or a warm tone, depending on the unit supplied for the booking. The letters are substantial enough to anchor a room, yet still practical for indoor placement and controlled outdoor use under cover.

For wedding receptions and engagement celebrations, the set works well when the venue wants one clear photo point rather than a cluttered backdrop. The faces are smooth and even, so the word reads clearly from several angles. That matters in spaces with mixed lighting, tall ceilings or strong décor colours that can otherwise swallow smaller signage.

Sizes, build and placement options for 1m LOVE letters

The standard hire set is a four-letter illuminated word arranged as L O V E, with each character around 1 metre high. The footprint varies a little with spacing, but the full display normally needs a clear run of floor space in front of the wall or backdrop. A level surface helps keep the letters aligned and keeps the glowing faces straight for photographs.

  • Approximate letter height: 1m each
  • Lighting: internal LED illumination
  • Placement: indoor floors, covered outdoor areas, stage fronts, entrance zones
  • Power: standard venue power point with safe cable routing
  • Set-up: positioned and checked on site by the event team
  • Collection: removed after the event or late-night collection by arrangement

Some venues prefer the word centred on a backdrop panel, while others want it free-standing in open space. The layout depends on aisle width, dance floor size and where guests naturally gather for photographs. A careful line-up makes the display feel balanced, not crowded.

Best fit for weddings, proposals and corporate photo corners

These illuminated letters suit wedding receptions, engagement evenings, bridal showers and anniversary dinners, but they also work for product launches and brand functions where a softer romantic tone is needed. The display often sits behind a loveseat, near floral arrangements, or at the edge of the main room where guests pause and take pictures.

At corporate events, the set can be used as a photo feature for themed activations, staff celebrations or client functions. The letters are neutral enough to sit with most colour schemes, and the light output helps them hold their shape in darker venues. In larger rooms, adding uplighting or a simple backdrop keeps the feature visible without turning the area into visual clutter.

  • Wedding receptions
  • Engagement parties
  • Proposals and announcement evenings
  • Anniversaries and private dinners
  • Launches, awards nights and company functions

Set-up details, power points and safe cabling on site

The 1m LOVE letters use mains power, so the venue power point position matters. Our setup team checks where the socket sits, how the cable can run, and whether the display will sit clear of walkways, door swings and service routes. When power access is limited at the venue, we may adjust the layout so the cable stays tucked away and the letters stay securely fixed in place.

With several letters in a row, the leads are gathered behind the set and run to the socket as one neat line. Cables are kept tidy and away from guest movement, with the goal of protecting both the display and the people moving around it. On polished floors, carpeted halls or outdoor decks under cover, the footing is checked before the word is left in position. That small bit of care matters, because a bright feature can still cause trouble if the cable is left loose or the base is not seated properly.

Keeping the letters clean between events

The letters are wiped down before and after hire so the illuminated faces stay presentable. Finger marks, dust and transport scuffs can show under strong light, especially in ballroom settings or when the display sits close to a camera flash. A dry cloth is usually enough for routine care, while any heavier marks are handled by the team after collection.

Clients are asked to keep drinks, confetti cannons, sparklers and décor adhesives away from the unit surface. That helps protect the finish and keeps the lighting even from one event to the next. If the display is moved by venue staff after set-up, it should only be shifted once the power is isolated and the cable cleared. It sounds minor, but the letters are large enough to make a mess of a tight room if handled carelessly.

  • Keep liquids off the base and wiring
  • Avoid leaning floral frames or props against the faces
  • Do not drape fabric directly over the lit panels
  • Leave the display where it was positioned after setup

Booking details that help match the right layout

When arranging the 1m LOVE letters, it helps to confirm the venue suburb, access route, surface type and the time the display should be in place. The team also needs to know whether the set is going indoors, under cover outdoors, or into a room with a fixed stage line. If the venue has narrow doors, stairs or loading limits, that affects how the letters are carried and positioned.

It is also useful to confirm whether you want the word as a stand-alone focal point or combined with other hire items such as a lightbox, marquee letters or a photo area layout. That gives the setup crew enough detail to plan the spacing and keep the display tidy in the room. For late-night collection, the handover point at the venue should be clear, especially where venue staff control access after the main celebration has ended.

  • Event date and venue location
  • Indoor, covered outdoor or open-air placement
  • Power point position near the display
  • Floor type, access steps and doorway width
  • Whether the letters sit alone or with other décor items
  • Collection timing and venue handover details

Delivery across Gauteng and on to other event towns

LED-Lightbox Rental handles delivery, set-up and collection from the Midrand base across Johannesburg, Pretoria, Sandton, Centurion and surrounding event areas, with out-of-town logistics available for longer runs including Durban. The transport and installation plan is set around the venue, access times and the layout on site, so the letters arrive ready for positioning rather than sitting boxed in a corner.

The 1m LOVE set is often paired with a back wall, floral frame or simple stage dressings, and the install crew works around the space already booked at the venue. That keeps the feature looking intentional rather than dropped in at the last minute. For clients planning a reception with mixed décor pieces, the illuminated word gives the room a steady visual point that holds up in photos and in person.

Key facts

Product1m LOVE illuminated letter hire set
HeightApprox. 1 metre per letter
LightingInternal LED illumination
PowerStandard venue power point required
PlacementIndoor and covered outdoor use
Service areasMidrand, Johannesburg, Pretoria, Sandton, Centurion and Durban

What our LED Lightbox Hire customers say

Verified Google reviews

Lightbox hire questions

Does the 1m LOVE set need venue power?

Yes. The letters use mains power and the site check includes the position of the nearest power point and a safe cable path.

Can the letters be placed outdoors?

They suit covered outdoor areas where the surface is level and the display can be protected from weather exposure.

Can the LOVE letters be used with other hire items?

Yes. They are often combined with lightboxes, marquee letters or a photo area layout when the room needs a stronger focal point.

Got a date and a venue? Tell us the words you want lit up.

Contact form